GLAZE ROOM: This room is used for mixing and application of glazes, and is equipped with a spray booth, a slot-hood ventilation system, and a slip mixing table, in addition to storage and work areas.
MOLD ROOM: This room is reserved for plaster mixing, and it also houses a power sprayer for silk-screen cleaning as well as a sand-blasting booth.
CLAY MIXING ROOM: This area serves for general bulk material storage as well as clay mixing, and the room features a powerful ventilation system for safety.
KILN AREA: This includes both a covered outdoor area which houses most of the kilns, and an adjacent area which is walled in but exposed, and which is the site for our raku and wood/salt kilns now in progress.
GENERAL STUDIO AREA: This is the area where classes are held. There are 18 potters wheels, extruders, a slab roller, and plenty of tables for work space. Individual studios for advanced and grad students line the perimeter of the room (these are11 X 8 feet in size, and usually house one grad student or 1-3 advanced students).
2 large gas kilns (24 and 36 cu. ft.)
1 raku kiln
1 gas test kiln (3 cu ft)
1 wood/salt kiln
7 electric kilns (3, 3, 5, 10, 10, 10, and 15 cu. ft)
20 electric wheels
Clay mixer (Soldner, 150lb capacity)
Slip Mixing table
Peter Pugger Vacuum Pugmill
1 Slab roller (24” wide)
2 Extruders (Bailey)
1 Ball mill
1 Spray booth
1 Hydraulic lift cart
1 Hydraulic pallet lift
1 Pallet jack
1 Sandblasting booth
1 tile press
2 silk screen exposure units
page last updated 11/18/2014 4:17 PM